****OBSOLETE - SEE STERLING QVEF****
These gas heaters are a complete heat generating and distribution plant equipped with automatic safety controls all packaged in a modern streamlined, space saving casing for mounting near the ceiling.
· CSA certified for 80% efficiencies
· 14 sizes ranging from 30 to 400 MBH
· Aluminized steel heat exchanger -20 gauge
· Optional 409 and 321 stainless steel heat exchangers
· Single stage gas valve (STD)
· Optional 2 stage and modulating gas valves
· Standing pilot (STD) on QVF models
· Available in Natural or LP gas
· Easy burner access with individual removable burners
· Two point suspension
· 10 YearWarranty
· Factory fire tested
All these gas heaters are equipped with a 24 volt control system which is powered by a 115/24 volt transformer as standard equipment.
The fan time delay switch is mounted at the factory as standard equipment on all gas heaters. This feature eliminates an initial blast of cold air by allowing the unit to fi re for a short period of time before actuating the fan motor. After the thermostat is satisfied (with burners off) the fan continues to operate for approximately 1 minute, removing residual heat from the heat exchanger, an added economy feature.
On units 30,000 thru 400,000 BTU/HR (8.8 thru 117.1 kW) input, Sterling supplies a combination type gas valve which has a pressure regulator, shut off valve and main gas valve combined into one single valve. It also incorporates an automatic pilot safety switch and a blocked vent (spill) switch for 100% shutoff. Approved for use on all gases.
Spark ignition is available as an optional extra on these gas heaters. The pilot burner is ignited only during each cycle of operation, thereby conserving energy during the off cycle. Required for installation in California.
All Sterling gas heaters are so designed that the bottom pan can be dropped to expose the burners, pilot and orifices. Burners are individually removable for inspection and servicing. Pilot is also accessible through side panel access door on 100 thru 400 models.
All Sterling gas heaters are test fired at the factory to insure proper operation at time of installation. The Sterling Gas-Fired Unit Heater is a complete heat generating and distributing plant equipped with automatic safety controls all packaged in a modern streamlined, space saving casing for mounting near the ceiling. Propeller gas heaters are low static pressure appliances. At no time should ductwork or 5-way nozzles be used with propeller units.
The designs are certified by C.S.A. International as providing 80% combustion efficiency. Approved for use in California when equipped with spark ignition.
The complete heat exchanger, draft hood assembly and burners are warranted by Sterling HVAC Equipment to be free from defects in materials and workmanship for a period of ten (10) years from the date of manufacture.
Sterling gas heaters incorporate an exceptional balance of motor and blower to insure quiet operation and still maintain CFM delivery to provide comfort heating where required.
Sterling heat exchangers are available in 3 types of 20
gauge steel:
• Aluminized Steel (Standard) (All units)
• 409 Grade Stainless Steel (Optional) (QVF-30-400)
• 321 Grade Stainless Steel (Optional) (QVF-100-400)
All sizes 30,000 thru 400,000 BTU/HR (8.8 thru 117.1 kW) input are equipped with a proven design, pressed steel burner having a unique "burner shade" protective device to prevent scale or foreign matter from plugging the burner ports. This burner is available in both aluminized and 409 stainless steel.
All gas heaters are available for operation on either natural or LP gas from our factory.
Controls are factory-wired to permit continuous air circulation for summer comfort. Just add the Sterling thermostat (option AS-G3) to provide year-round comfort.

General Information:
Sterling QV Propeller Units Information

Installation:
Sterling QV Propeller Units Installation
Availability: Time from order placement until shipment is 5-10 business days.
Shipping: As always, shipping in the USA (lower 48 states) is included. Orders less than 100 lbs ship via UPS Ground. Larger orders ship via truck (FedEx Freight, Roadway Express, Old Dominion, etc). Local pick-ups at the factory are not allowed. Please contact us for shipping quotes to Hawaii and Alaska.
Questions: If you have any questions, please EMAIL or call Toll Free: 877-301-4660.